Custom

Custom Applications
  • Nickel Plated Encasement
  • High Temperature
  • Inside Shaft Mount
  • High Voltage
  • High Amperage
  • Encoder Units
Nickel Plated Through Bore Units
These units are used primarily in Coil Tubing reel applications and are available with through bore sizes of 6 & 8 inches with up to 8 rings. Each unit is filled with synthetic oil and has break away cable installation (no need to disassemble unit to replace damaged cable).

Standard Specifications

Standard Specifications
Operating Current 7.5 amps per ring
Operating Voltage 1,000 VRMS
Electrical Noise 5µV, P-P, BW=10Hz-10kHZ at 8.5 mA, 500rpm
Leakage Resistance 10,000 MΩ (min)
Temperature Range -30°F to 175ºF
Enclosure Nickel Plated Aluminum
Leads Industry Standard DAC 1048, 16AWG, 8 Conductor Cable, 1000 Volt, 3ft

Options

Options
Wire leadsLonger leads than 3 ft. standard lengths
High Temperature (HT)
The HT style units evolved through custom development with customer partners in the petroleum industry. These unique products are designed for the harshest of environments and they are able to withstand the high pressure and extreme temperature typically associated with downhole tooling applications. Our standard unit is manufactured with 2 foot leads on each end. The HT-1.79 and HT-1.85 are 20 ring units designed to run in synthetic oil. Mounting options can be modified to meet customer specific needs.

Standard Specifications

Standard Specifications
Operating Current 7.5 amps per ring
Operating Voltage 1,000 VRMS
Electrical Noise 5µV, P-P, BW=10Hz-10kHZ at 8.5 mA, 500rpm
Leakage Resistance 10,000 MΩ (min)
Temperature Range -30°F to 392°F
Enclosure Anodized Aluminum, Stainless Steel
Leads 20 AWG TFE covered wire, 2ft long

Options

Options
Temperature  -45°F to 500°F
Wire leadsLonger leads than 2 ft. standard lengths
MountingTo customer specifications
Sample Applications Include:
  • Signal Transfer
  • Stress and Torque Reading
  • Downhole Tools
Inside Shaft Mount (ISM)
The ISM is a sealed unit in a NEMA 4X enclosure. These units are designed to mount inside of a shaft and may be filled with synthetic oil for condensation prevention.

 

Standard Specifications

Standard Specifications
Operating Current 7.5 amps per ring
Operating Voltage 1,000 VRMS
Electrical Noise 5µV, P-P, BW=10Hz-10kHZ at 8.5 mA, 500rpm
Leakage Resistance 10,000 MΩ (min)
Temperature Range -30°F to 175°F
Enclosure Stainless Steel, NEMA 4X

Options

Options
Current  Up to 24 amps per ring
Voltage versions  Up to 2,000 VDC, Up to 6,000 VDC for synthetic oil
Bandwidth  DC to 250 MHz
Temperature  -45°F to 500°F
Connectors  To customer specifications
Wire  Coax, twisted pair, thermocouple, to customer specs
Wire leadsLonger leads than 2 ft. standard lengths
MountingTo customer specifications
Subsea  Wet-mateable connectors
Sample Applications Include:
  • Oceanographic Instrumentation
  • Seismic Acquisition Equipment
  • Oil Well Logging
  • Food Processing
  • Packaging Machines
  • Bottle/Can Fillers
  • Defense Applications
  • Marine Winch and Towed Arrays
  • Wind Turbines
Encoder Units

We can incorporate standard magnetic or optical encoders within our FM, ISM, and BXXP units.